Typically, a Wall Area Within Premises That is Prone to Undesirable Substances, i.e. Fluids and Food, Splashing Against It Will Require a Protective Splashback - Back Splash. Common Splashback - Back Splash Materials are Glass, Tiles and Stainless Steel.

Coloured Matte - Satin Glass Splashbacks - mattePRO ™   from Geelong Splashbacks are sheets of 6mm Float Glass, in accordance with AG/601 & AS/NZS1288, expertly measured and cut to size.

Once cut to size all Matte - Satin Glass Splashbacks - mattePRO ™   cut-out requirements and edge processing are completed prior to the glass being heat treated to the requirements of AS2208 which results in ‘Grade A Safety Glass’. This type of glass is commonly referred to as ‘Toughened Glass’or 'Safety Glass".

Matte - Satin Glass Splashbacks - mattePRO ™   ‘Toughened Safety Glass’ is approximately six times stronger than Float Glass and can withstand temperature differences of up to 280oC as opposed to 50-60oC for Float Glass. ‘Toughened Safety Glass’ cannot be cut, drilled or machined in any shape or form.

The completed piece of Matte - Satin Glass Splashbacks - mattePRO ™   ‘Toughened Safety Glass’ is then cleaned and prepared for the back of it to be Coated using the most up-to-date hi-tech materials and equipment by Geelong Splashbacks.

Coloured Matte - Satin Glass Splashbacks - mattePRO ™   from Geelong Splashbacks are used or more so required in Kitchens, Bathrooms / Ensuite, Laundries, Bars. The walls above the benchtop in these areas are required by the Building Code of Australia ( BCA ) to be protected and water tight.

Below is a Basic List of Situations Where Coloured Matte - Satin Glass Splashbacks - mattePRO ™  Can Be Used:

Kitchens

Bathrooms - Shower Recesses

Ensuites - Shower Recesses

Laundries

Shop Fit-Outs

Feature Walls

Restaurants

Offices

BBQ Areas

Change Room Shower Cubicles

Geelong Splashbacks Supplies & Installs Custom Measured & Cut To Size Matte - Satin Glass Splashbacks - mattePRO ™   for Kitchens - Bathrooms - Ensuites - Laundries.

The Largest Size of Glass Matte - Satin Glass Splashbacks - mattePRO ™   Available From Geelong Splashbacks is: .

1800mm(H) x 3100mm(W)

Matte - Satin Glass Splashbacks - mattePRO ™   are Available in Custom Measured & Cut To Shape Designs from Geelong Splashbacks for Kitchens - Bathrooms - Ensuites - Laundries.

The Simplest Way to See the Shapes Possible is To View The Fantastic Photos / Images of Completed Projects by Geelong Splashbacks Within this Website.

Power Point Cut Outs in Matte - Satin Glass Splashbacks - mattePRO ™   are Recommended by Geelong Splashbacks to Be a Minimum 50mm From the Edge of the Glass Splashbacks.

The 50mm Minimum Distance for Power Points in Matte - Satin Glass Splashbacks - mattePRO ™   Ensures Safety and that Geelong Splashbacks Matte - Satin Glass Splashbacks - mattePRO ™   Conforms with the Requirements by The Building Code of Australia (BCA).

Circle Hole Cut Outs in Matte - Satin Glass Splashbacks - mattePRO ™   are Recommended by Geelong Splashbacks to Be a Minimum 50mm From the Edge of the Glass Splashbacks.

The 50mm Minimum Circle Hole Distance for Holes in Matte - Satin Glass Splashbacks - mattePRO ™   Ensures Safety and that Geelong Splashbacks Matte - Satin Glass Splashbacks - mattePRO ™   Conforms with the Requirements by The Building Code of Australia (BCA).

There are Matte - Satin Glass Splashbacks - mattePRO ™   Shape Restrictions & Limitations of the Physical Properties of Glass that must be Adhered to and Followed.

These Matte - Satin Glass Splashbacks - mattePRO ™   Shape Restrictions & Limitations Ensure that Geelong Splashbacks Matte - Satin Glass Splashbacks - mattePRO ™   Conforms with the Requirements by The Building Code of Australia (BCA).

There are Many Different Matte - Satin Glass Splashbacks - mattePRO ™   Combinations of Shapes & Designs that are Possible and Not Possible to Achieve, these Combinations are Decided at the Time of Measurement by Geelong Splashbacks by Sizing, or by the Dimensions You May Provide in Advance to Find Out if the Shape is Possible. 

Geelong Splashbacks Will Bring Ten (10) Matte - Satin Glass Splashbacks - mattePRO ™   Samples to Your Home or Project to Help and Assist You Choose a Colour at Your Location.

Matte - Satin Glass Splashbacks - mattePRO ™   Sample Colours Include:

Black

White

Grey

Green

Red

Blue

Fused

With Ten (10) Matte - Satin Glass Splashbacks - mattePRO ™   Samples for You to View at Your Location, Geelong Splashbacks Can Help and ‘Assist’ You Choose a Colour that Will Suit Your New Home or Project.

Sometimes You May Simply Like to Know an Approximate Price of Matte - Satin Glass Splashbacks - mattePRO ™   ? ?

Prior to Calling please:

Have Sizes Ready

Geelong Splashbacks Realises that Matte - Satin Glass Splashbacks - mattePRO ™  Prices will Vary from Supplier to Supplier but Would Like You to Consider:

. . . i may not be the Cheapest, i may not be the Most Expensive, however, what i do i do great . . .

24 Years Experience

Fair Rate Policy

Geelong Splashbacks Prides Itself of Providing Matte - Satin Glass Splashbacks - mattePRO ™   Services & Products at a Fair Rate.

Matte - Satin Glass Splashbacks - mattePRO ™   are Ready to Measure and Quote once the Area Required is Prepared in Excellent Condition.

Experience has Taught Geelong Splashbacks that when Choosing a Glass Splashback Colour for Your Kitchen, Bathroom, Ensuite or Laundry it is Much Better and More Successful when all the Cabinets and Benchtops are Completely Installed.

If Your Kitchen, Bathroom, Ensuite or Laundry is Not Ready but You Would Like to Know a Price, Simply Write the Approximate Required Sizes and Phone Geelong Splashbacks to Get an Idea of a Price.

Matte - Satin Glass Splashbacks - mattePRO ™   are Ready to Measure When:

(if) the Area is Suitable to be Tiled, it is Ready for Matte - Satin Glass Splashbacks - mattePRO ™  

A simple Matte - Satin Glass Splashbacks - mattePRO ™   checklist would include:

Kitchen Completely Installed

Benchtop Completely Installed

Walls Solid, Intact and Sealed ( painted / sealed )

Raw Brickwork Covered (4mm cement sheet )

All Electrical and Plumbing Completed

Rangehood Installed or Clearly Outlined on the Wall with Hi-Lited Fixing Holes

When Organising Geelong Splashbacks to Come to Your Premises to Measure & Quote Matte - Satin Glass Splashbacks - mattePRO ™   Please Ensure the Area is Clear and Clean.

Geelong Splashbacks Matte - Satin Glass Splashbacks - mattePRO ™   Workmanship is Backed by a 7 Year Warranty.

Full Warranty and Terms & Conditions are Clearly Provided by Email Prior to Agreeing to Commence a Matte - Satin Glass Splashbacks - mattePRO ™   Project.

Matte - Satin Glass Splashbacks - mattePRO ™   from Geelong Splashbacks Conforms to AG/601 & AS/NZS1288 Australian Glass Standards.

Once cut to size all Matte - Satin Glass Splashbacks - mattePRO ™  cut-out requirements and edge processing are completed prior to the glass being heat treated to the requirements of Australain Glass Standard AS2208 which results in ‘Grade A Safety Glass’. This type of glass is commonly referred to as ‘Toughened Glass’.

‘Toughened Glass’ Matte - Satin Glass Splashbacks - mattePRO ™  is approximately six times stronger than Float Glass and can withstand temperature differences of up to 280oC as opposed to 50-60oC for Float Glass. ‘Toughened Glass’ cannot be cut, drilled or machined in any shape or form.

NOTE: Geelong Splashbacks ‘only’ uses Matte - Satin Glass Splashbacks - mattePRO ™   Glass that conforms to the Building Code of Australia ( BCA ). Requests or demands to use cheaper inferior glass ( non-toughened ) will result in Geelong Splashbacks rejecting the project, regardless if others offer and quote cheaper options.

All Matte - Satin Glass Splashbacks - mattePRO ™   Provided By Geelong Splashbacks Conform to All Rules & Regulations as Outlined & Detailed in the BUILDING CODE of AUSTRALIA (BCA).

Geelong Splashbacks Matte - Satin Glass Splashbacks - mattePRO ™   is Covered by Insurance:

PUBLIC & PRODUCTS LIABILITY POLICY SECTION

(A) Public Liabilty - $5,000,000

(B) Pruducts Liability - $5,000,000

With Full Public & Products Liabilty Insurance You Can Confident in Choosing Geelong Splashbacks to Supply & Install Matte - Satin Glass Splashbacks - mattePRO ™   Products in All Environments.

Geelong Splashbacks Holds a Current:

Occupational Health & Safety Construction Induction WORKSAFE VICTORIA CARD

Geelong Splashbacks Prides Itself in Safely & Professionally Conducting All Matte - Satin Glass Splashbacks - mattePRO ™   Duties to Comply with WORKSAFE VICTORIA

Geelong Splashbacks Provides Expert Matte - Satin Glass Splashbacks - mattePRO ™   to the areas listed below:

Note: If Your Area is Not Listed Below Please Call Us and Ask if We Professionally Provide Matte - Satin Glass Splashbacks - mattePRO ™   in Your Area.

AIREYS INLET

ALBERT PARK

ANAKIE

ANGLESEA

APOLLO BAY

ARMADALE

ARMSTRONG CREEK

AUSTRALIA

AVALON

BALLARAT

BANNOCKBURN

BARWON HEADS

BATESFORD

BEAUMARIS

BELL PARK

BELL POST HILL

BELLARINE PENINSULA

BELLBRAE

BELMONT

BLACK ROCK

BREAMLEA

BREAKWATER

BRIGHTON

BROOKLYN

CERES

CLIFTON SPRINGS

COLAC

CONNEWARRE

CORIO

CURLEWIS

DRUMCONDRA

DRYSDALE

EAST GEELONG

ELWOOD

FRESHWATER CREEK

FYANSFORD

GEELONG

GEELONG EAST

GEELONG NORTH

GEELONG SOUTH

GEELONG WEST

GREAT OCEAN ROAD

GROVEDALE

HAMLYN HEIGHTS

HERNE HILL

HIGHTON

HOPPERS CROSSING

INDENTED HEADS

JAN JUC

KENNET RIVER

KOOYONG

LARA

LEOPOLD

LETHBRIDGE

LITTLE RIVER

LORNE

LOVELY BANKS

MANIFOLD HEIGHTS

MANNERIM

MARCUS HILL

MARSHALL

MELBOURNE

MEREDITH

MIDDLE PARK

MOOLAP

MOORABOOL

MORIAC

MOUNT DUNEED

NEWCOMB

NEWPORT

NEWTOWN

NORLANE

NORTH GEELONG

NORTH SHORE

OCEAN GROVE

POINT COOK

POINT LONSDALE

POINT WILSON

PORTARLINGTON

QUEENSCLIFF

RIPPLESIDE

SANCTUARY LAKES

SANDRINGHAM

SKENES CREEK

SOUTHBANK

SOUTH GEELONG

SOUTH YARRA

ST ALBANS PARK

ST LEONARDS

ST KILDA

STAUGHTON VALE

SWAN BAY

TEESDALE

THE SANDS - TORQUAY

THOMSON

TOORAK

TORQUAY

VICTORIA

WALLINGTON

WANDANA HEIGHTS

WARALILLY

WAURN PONDS

WERRIBEE

WESTERN SUBURBS

WEST GEELONG

WILLIAMSTOWN

WYE RIVER

Matte - Satin Glass Splashbacks - mattePRO ™   Installation will occur in approximately 2 – 4 weeks.

Matte - Satin Glass Splashbacks - mattePRO ™   Installation will take approximately 2 - 4 hours.

Protective footwear must be worn by Installers While Installing Matte - Satin Glass Splashbacks - mattePRO ™   Products as required by WorkSafe Victoria. - ( if flooring is a concern please have adequate non-slip protection in place prior to Installers arrival )

Please ensure clear access to – Driveway, Hallways, Kitchen, Bathroom, Laundry ( i.e., area of Matte - Satin Glass Splashbacks - mattePRO ™   installation ) – prior to Installers arrival.

Please ensure clear and clean Work Areas – Kitchen, Bathroom, Laundry ( i.e., area of Matte - Satin Glass Splashbacks - mattePRO ™   installation ) – prior to Installers arrival.

Please do not use the cooktop within one ( 1 ) hour of appointment.

Matte - Satin Glass Splashbacks - mattePRO ™   Area of installation will be a ‘no go zone’ for 24 hours. ( HINT – a good idea is to wrap a towel around taps to remind you not to use them )

Geelong Splashbacks will leave your Matte - Satin Glass Splashbacks - mattePRO ™   Area as neat and tidy or better than before we arrived ( YES - we Clean Up After Ourselves and Remove 'Our' Rubbish  ).

Oven / Dishwasher can be used after 4 hours of Matte - Satin Glass Splashbacks - mattePRO ™   installation.

To Ensure the Maximum Duration of Your New Fantastic Matte - Satin Glass Splashbacks - mattePRO ™   from Geelong Splashbacks:

Clean your Matte - Satin Glass Splashbacks - mattePRO ™   on a Regular Basis

NEVER use Abrasive or Harsh Products that include Cleaning Items and Chemicals on the Matte - Satin Glass Splashbacks - mattePRO ™  , they will Ruin the Matte - Satin Glass Splashbacks - mattePRO ™   Forever !!

Clean Regularly Around the Bottom and Corners of Matte - Satin Glass Splashbacks - mattePRO ™   , Especially the Hard to Get into Places ( try a toothbrush at medium pressure in the corners and framing joins to avoid scum build up, it will make it last longer )

Wipe Dry Silicone Sealants Behind Matte - Satin Glass Splashbacks - mattePRO ™   Kitchen Sinks and all Other Wet Areas to Avoid Pre-Mature Mould Build Up

Wipe Dry and Clean Silicone Sealants Behind Matte - Satin Glass Splashbacks - mattePRO ™   Cooktops to Avoid Pre-Mature Mould Build Up and Silicone Discolouration from Cooking Splatter.

Matte - Satin Glass Splashbacks - mattePRO ™   from Geelong Splashbacks Conforms to AG/601 & AS/NZS1288 Australian Glass Standards.

Once cut to size all Matte - Satin Glass Splashbacks - mattePRO ™   cut-out requirements and edge processing are completed prior to the glass being heat treated to the requirements of Australain Glass Standard AS2208 which results in ‘Grade A Safety Glass’. This type of glass is commonly referred to as ‘Toughened Glass’.

Matte - Satin Glass Splashbacks - mattePRO ™   ‘Toughened Glass’ is approximately six times stronger than Float Glass and can withstand temperature differences of up to 280oC as opposed to 50-60oC for Float Glass. ‘Toughened Glass’ cannot be cut, drilled or machined in any shape or form.

NOTE: Geelong Splashbacks ‘only’ uses Matte - Satin Glass Splashbacks - mattePRO ™   Glass that conforms to the Building Code of Australia ( BCA ). Requests or demands to use cheaper inferior glass ( non-toughened ) will result in Geelong Splashbacks rejecting the project, regardless if others offer and quote cheaper options.

"NO ONE" can 100% Guarantee Matte - Satin Glass Splashbacks - mattePRO ™   Glass Will Not Break. In Stating so, If Matte - Satin Glass Splashbacks - mattePRO ™   Glass was to Routinely Break the Building Code of Australia ( BCA ) Would Review the Use of Matte - Satin Glass Splashbacks - mattePRO ™   Glass Safety and Amend the Regulations & Requirements for Areas that 'Typically' Use Matte - Satin Glass Splashbacks - mattePRO ™   Glass.